Products

Home- Products- Dyeing Color Fixing

Rubbing Fastness Enhancer DF-5B2B

Active, sulfurized, direct, and indigo dyes have particularly low wet friction fastness when dyeing dark colors on cellulose fibers. DF-582 dry wet friction fastness enhancer is suitable for cotton fabrics, printed fabrics, blended fabrics, jeans, and other fabrics. It can improve the product's stability to salt and alkali, reduce the structural deficiencies of the product itself, and is a fully environmentally friendly dry wet friction fastness enhancer.

Product Details

Introduction

Active, sulfurized, direct, and indigo dyes have particularly low wet friction fastness when dyeing dark colors on cellulose fibers. DF-582 dry wet friction fastness enhancer is suitable for cotton fabrics, printed fabrics, blended fabrics, jeans, and other fabrics. It can improve the product's stability to salt and alkali, reduce the structural deficiencies of the product itself, and is a fully environmentally friendly dry wet friction fastness enhancer.

Characteristics

Appearance: Light yellow transparent mucus

Ionic: cationic

PH value: 4.5 ± 0.5 (50g/l)

Solubility: Easy to disperse in water

Basic Character

1. This product does not contain formaldehyde or APEO, and is an environmentally friendly product that meets the requirements of the EU OEKO-TEX Standard 100;

2. Used for fixing treatment after dyeing cellulose fibers; The effect of greatly improving wet friction fastness can be increased by 1-1.5

Level 3 or above;

3. Easy to use, directly dilute with water for use; The fabric has a soft hand feel and has no effect on color and sunlight fastness.

Application

1. Please use immediately after preparation, and conduct sufficient sample testing before use. The above process is for reference only.

2. Can be used in the same bath with silicone oil and soft oil, cannot be used in the same bath with anionic additives.

3. Controlling the temperature of the working fluid between 25 ℃ and room temperature yields the best results.

Before using the lifting agent, clean the fabric thoroughly with alkali (pH ≤ 7), salt, and soap detergent.

5. If a large amount of foam is generated in the rolling groove after a long time of use, the foam shall be removed in time or the rolling groove shall be cleaned and the working fluid shall be changed.

6. This product is not alkali resistant, and the working fluid should maintain a pH value of ≤ 5.5 as much as possible.

7. The water used for the working fluid should be tap water with a concentration of ≤ 100ppm.

Store

Shelf life: 6 months (store in a cool, dry, ventilated place, avoid sunlight, heat, humidity, and store below 25°C)

25 KG, 125 KG / barrel

Inquire Now

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.